1. Wire Cutter: used to cut the wires;
2. Wire Stripper: used to strip off some part of the insulation of a cable;
3. Crimping Plier/Ratcheting Crimpers: used to tighten the terminals to the stripped wires;
4. Heat Gun: uses high temperature to shrink the covering plastic tubes to the body of the cable;
5. Multimeter: used to test for continuity and other parameters within the wiring connection;
6. Heat shrink: a soft plastic used as a covering for connection joints;
Wires: connecting wires for the flow of signal/power from the source to the needed terminal;
7. Terminals: a plastic body with a conducting head that makes contact with the bare/stripped wire;
8. Zip Ties: used to bundle the wire harnesses neatly.
