Nowadays, the application of flat cable is very extensive, but it is not very common in our daily life, because it is suitable for the internal wiring of general electronic appliances. In fact, all the electrical appliances around us contain all kinds of cables. Open a 35mm camera, there are 9 to 14 different cables inside, because the camera is getting smaller and more functional. The only way to reduce the volume is to have smaller components, finer lines, tighter pitches, and bendable objects. Pacemakers, medical equipment, video cameras, hearing aids, portable computers-almost everything we use today has cables in them.
The production and wiring harness processing technology of the cable is also very rigorous. flat cable processing custom from the initial pressure to cut out in the end, including channel detection, need a large number of operating personnel careful careful execution, and we are often unable to completely avoid the problem in the process of production and processing, and can only be in the process of production, the good control each link to avoid mass flat cable processing product quality problem, to meet a ribbon cable wire processing common easy to analysis of reasons causing the problems, find a solution.
The process of flat cable processing and customization is relatively simple. There are only a few short procedures. The most important point is the final quality inspection link. For each flat cable, we must do line inspection to eliminate the internal disconnection of the flat cable. Displacement with the connection point.