At present, many electronic processing companies will use the flat cable, in order to save costs, they will look for processing, rather than own production. However, the quality of the flat cable has always been the concern of electronics manufacturers, so how should the flat cable processing factory ensure the quality of the products?
Five ways to ensure the quality of processing
1. The processing details of the flat cable determine the quality of the cable
The wire dip tin/tinning needs to control the time
After the wire is stripped, once the wire is stained with tin, too long heating time may cause the PVC to shrink due to heat. Therefore, control the tinning time not to be too long, and ensure that the tin is evenly and completely covered.
2. Pay attention to the PIN of the terminal when wearing the plastic shell
When the housing is worn, the terminal PIN often occurs. During the production process, the flat cable processing plant needs to insert a pull back action at each hole to ensure that each terminal through the housing is in good condition.
3. Ensure sufficient tension after crimping
If the tension cannot be reached after crimping, you need to check whether the crimping range of the terminal and the wire conductor is suitable; whether the material of the mold blade and the design of the structure are reasonable; whether the material of the terminal meets the standard and so on.